|
| 支化聚乙烯亚胺功能化磁性纳米吸附剂的制备及对Cu2+的吸附研究 |
| Preparation of branched polyethyleneimine functionalized magnetic nano-adsorbents and adsorption properties of Cu2+ |
| 投稿时间：2021-06-30 修订日期：2021-08-27 |
| DOI： |
| 中文关键词: 支化聚乙烯亚胺；四氧化三铁纳米粒子；吸附；Cu2+ |
| 英文关键词: branched polyethyleneimine; Fe3O4 nanoparticles; adsorption; Cu2+ |
| 基金项目:贵州省科技计划项目(黔科合基础[2018]1173)；贵州省科技计划项目(黔科合基础[2020]1Y163)；贵州省科技计划项目(黔科合基础[2018]1170) |
| 作者 | 单位 | 邮编 | | 崔灿 | 贵州民族大学 化学工程学院 | 550025 | | 牛姣姣 | 贵州民族大学 化学工程学院 | | | 谢雅典 | 贵州民族大学 化学工程学院 | | | 胡海良 | 贵州民族大学 化学工程学院 | | | 张建辉 | 贵州民族大学 化学工程学院 | | | 林森 | 中国科学院地球化学研究所 地球内部物质高温高压院重点实验室 | 550081 |
|
| 摘要点击次数: 105 |
| 全文下载次数: 0 |
| 中文摘要: |
| 为解决水体中重金属Cu2+污染，本研究首先采用水热法制备得到超顺磁四氧化三铁纳米粒子，然后使用对Cu2+具有强络合作用的含有丰富氨基官能团的支化聚乙烯亚胺接枝到纳米粒子表面，得到Fe3O4@BPEI磁性纳米吸附剂。采用红外光谱（FTIR）、X射线粉末衍射(XRD)、透射电子显微镜（TEM）等对其结构、尺寸及形貌进行表征。研究了不同吸附因素对吸附剂吸附Cu2+的影响，确定了最佳吸附条件，并通过吸附动力学模型和吸附等温线模型进一步探讨吸附机理。结果表明：支化聚乙烯亚胺成功接枝到四氧化三铁纳米粒子表面。最佳吸附条件为pH = 6.0、吸附平衡时间为40 min、吸附剂用量为10 mg。通过实验数据拟合，Fe3O4@PEI吸附Cu2+的过程符合Langmuir等温吸附方程和拟二级动力学模型，表明吸附过程为化学吸附控制的单分子层覆盖，在303 K时，模型理论饱和吸附量为141.24 mg/g。表明支化聚乙烯亚胺修饰的磁性纳米吸附剂对Cu2+具有较强的吸附能力，对水体中Cu2+的去除具有一定的应用前景。 |
| 英文摘要: |
| In order to solve the water contamination arises from heavy metal Cu2+, in this study, superparamagnetic Fe3O4 nanoparticles were firstly prepared by hydrothermal method, and then branched polyethyleneimine (BPEI), which contains rich amine group functional groups and has a strong complexation ability to Cu2+, was grafted onto the surface of the Fe3O4 nanoparticles to obtain magnetic nano-adsorbent Fe3O4@BPEI. The structure, size and morphology were characterized by infrared spectroscopy (FTIR), X-ray powder diffraction (XRD) and transmission electron microscopy (TEM). The effects of solution pH, time, adsorbent dosage, temperature and initial concentrations of metal ions on the adsorption of Cu2+ were studied, and the optimal adsorption conditions were determined. The adsorption mechanism was further discussed by adsorption kinetics models and adsorption isotherm models. The results showed that BPEI was successfully grafted onto the surface of Fe3O4 nanoparticles. The optimal adsorption conditions were obtained: pH = 6.0, adsorption equilibrium time was 40 min and adsorbent dosage was 10mg.The adsorption behavior of Fe3O4@PEI complies with the second-order kinetic model and the Langmuir isothermal model, which indicates that the adsorption process of Cu2+ by Fe3O4@PEI is monolayer coverage, and controlled by chemical interactions. The theoretical saturation adsorption capacity of the model is 141.24 mg/g at 303 K. The results show that the magnetic nano-adsorbent modified by branched polyethyleneimine is an efficient adsorbent for the adsorption of Cu2+ from aqueous solution, and has a certain application prospect. |
|
View Fulltext
查看/发表评论 下载PDF阅读器 |
| 关闭 |
